Black masterbatch Appliance Housing/BPA/German LFGB/High-Gloss Injection Molding

Product Detail

Product Description

Using a unique process, in which environmentally friendly pigment carbon black is pre-dispersed and then plasticized and internal-mixed with the base resin. It is widely used in high-gloss injection molding and engineering plastics coloring applications.

Suitable materials: PC/ABS, PA, ABS, SAN, etc.

Features
● Good blackness, blue tone, high coloring power, and excellent dispersion in styrenic engineering plastics.
● Carbon black content accounts for approximately 37% of the organic content, providing high tinting strength.
● Low addition rate with minimal impact on the physical properties of final products.

Applications
● Injection molded plastic products

● Extruded pipes, sheets/profiles

● Modified engineering plastics

Specifications：

Test Item	Standard	Unit	Requirement
Appearance		N/A	Cylindrical pellets
Carbon Black Content	GB/T 13021‑1991	%	37 ± 1.0
Moisture content	GBT6284-2006	%	≤0.5
Notched impact strength	GB/T1843-2008	KJ/m3	20.95
Environmental Protection Index		N/A	RoHS REACH PASH FDA

Note: The test results are typical values and are provided for customer reference only. They are not guaranteed as minimum or maximum quality specifications.
Storage method: The packaging bags should be stored in dry, sealed, and cool conditions, protected from ultraviolet light and/or direct sunlight. After each use, the packaging must be resealed to prevent the product from absorbing moisture, which could affect its performance.