Black Masterbatch · Modified Plastics/Engineering Compouding · PE/PP Modification

Product Detail

Product Description
Using a unique process, in which polymer additives are used as the base carrier, and environmentally friendly carbon black is pre-dispersed and then plasticized.

It is widely used in engineering plastics modification, as well as in PP, PE, PA, PVC and other applications. Features include low addition rate, high blackness, high gloss, high temperature resistance, excellent dispersibility and coloring power, while maintaining the original physical properties of the plastic products.

Features
● Good heat resistance and stability
● High coloring power, low addition rate
● Minimal effect on material properties
● High carbon black concentration with superior dispersion

Applications
● Compounding/modification

● PVC pipe extrusion

● Footwear materials

● Sheet thermoforming

Specifications：

Test Item	Standard	Unit	Requirement
Appearance		N/A	Uniform particles, no agglomerates
Carbon Black Content	GB/T 13021‑1991	%	57 ± 1.0
Dispersion	GB/T18251‑2019	Grade	No obvious yellow streaks or specks
Chromatic aberration	GB/T7921‑2008	△E*	≤0.3
Environmental Protection Index		N/A	ROHS

Note: The test results are typical values and are provided for customer reference only. They are not guaranteed as minimum or maximum quality specifications.
Storage method: The packaging bags should be stored in dry, sealed, and cool conditions, protected from ultraviolet light and/or direct sunlight. After each use, the packaging must be resealed to prevent the product from absorbing moisture, which could affect its performance.